HXE-22DW Fine copper wire drawing machine
I. Application
22DW Fine copper wire drawing machine is used to drawing copper wire from 0.6mm-1.2mm to 0.1mm-0.6mm.
II. Components
| Name | Quantity |
| 1. Pay-off shelf | 1 set |
| 2. HXE-22DW Fine copper wire drawing machine | 1 set |
| 3. Bobbin Unloading device | 1 set |
| 4. Spare parts | As per List |
| 5. Operation manual | |
III. Specifications
1. Inlet wire diameter: 0.6mm-1.2mm
2. Outlet wire diameter:0.1mm-0.6mm
3. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h.
4. Dies number: 22
5. Slip ratio (Area reduction) : 15%+ 8%
6. Wire drawing mode: horizontal-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor: 3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan: Ceramic plasma
12. Max capstan diameter: 242mm
13. Max fix speed capstan: 207mm
14. Machine structure: Cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: Flat belts
17. Pay-off method: Over-head
18. Tension control: Weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type
22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake
24. Power source: Customize
25. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight: 2500KG
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Installation
1. Requirement of the workshop arrangement :
If there are lots of machine needed to be installed, please refer to the attachment the workshop arrangement plan to keep the equipment in order.
2. Installation of the machine:
The machine should be installed at clean, flat and well ventilated floor, cushion rubber should be rovided under the bed plate, please fix the machine on the floor by the founding bolt to prevent shake and move when the machine is running, also to prevent undesired stop. The machine use 380V three phase power supply, the three R.S.T.pillars inside the control box are provided for power connection, another pillar is for earth connection, please make sure it is connected.
3. Cooling and lubricating method of the drawing line & the usage of the lubricating liquid:
A switch type sprinkle is installed on top of the primary drum, it doesn't affect the operation, No.1 and No.22 hole has separate lubricating line. For convenient operation, the lubrication liquid enter the machine from left side through a ball valve. When more machine are using together, a oil pond should provide for central cooling and lubrication system, also for filter dirt and copper chip, and cool down the lubricating liquid.
Product Tags:
|
|
22DW Fine Copper Wire Drawing Machine Flat Belts Transmission Magnetic Brake Images
|
