Customized Copper Wire Pulling Machine With AC 3 Phase Annealing 18.5KW Main Motor

HXE-24DTA Copper fine wire drawing machine with annealer

I. Application

HXE-24DWT Copper fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.

II. Components

III. Main Technical parameters

1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.1mm-0.6mm
4. Max. mechanical speed: 2000m/min
5. Dies: 22 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 18.5KW, Inverter control
8. Annealer motor: AC 3 Phase 3.7KW, Inverter control
9. Take up motor: AC 3 Phase 3.7KW, Inverter control
10. Power transmission: Timing belts+Triangle belts+Flat belts
11. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
12. Spool size: Diameter 300mm/Max (Customize), 250mm-127mm spooler is totally ok
13. Capstans: Ceramic plasma, Drawing capstan 242mm, Final capstan 207mm
14. Capstan lubrication: Water pipe spray
15. Traversing: 110W synchronous motor,transmission by flat belts.
16. Brake: 20KG-M Electromagnetic brake
17. Air pressure: 4-6kg/cm2
18. Annealing pulley: Diameter 120mm
19. Annealing volt: DC60V
20. Annealing current: DC800A
21. Annealing motor power: 48KVA
22. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
23. Machine dimension(L*W*H): 3500mm*1600mm*2200mm, Machine weight:3200kg
24. Power source: 415V, 50Hz(Customized)

IV. Machine structure

Annealing method is DC Three section annealing, there are three contact capstans, as Pre-Heating, Annealing and Drying. For drawing machine part, there is belts that connection from the Fix-speed capstan to the Annealer machine to achieve the transmission, as keep same speed.

Connect the Up capstan and Down capstan with Positive and Negative power, to make the wire in a short circuit, to achieve the heating.

There is annealing plate to auto track and adjust the speed and annealing voltage.

To achieve fast coolant to make the wire soft(Annealing), the Down capstan is immersed into the coolant water(There is a water tank in the bottom of the Annealer machine), coolant water is 0.5% emulsion. With the Pump to pump the coolant water through all pipes and valves, half sealed annealing door. Adjust the valves to adjust the coolant water in certain height.

To make sure the wire no oxidation, in the annealing protection pipe has steam (Buyer self will prepare Steam generator).

In the drying section, has a blowing device (Require two Tungsten dies, Buyer self prepare), by compressed air (Buyer self prepare Air compressor) to blow the water on the surface of the wire.

Lubrication oil concentration of mix with water 2-3%.

V. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.
(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

aluminum wire drawing machine

pulley wire drawing machine

Customized Copper Wire Pulling Machine With AC 3 Phase Annealing 18.5KW Main Motor Images