HXE-17DWT Copper wire drawing machine with annealer
I. Quick details
HXE-17DWT Fine copper wire drawing machine with annealer and double spooler is used to draw and anneal single bare copper wire from 1.8mm to 0.3mm-0.7mm.
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 1.8mm
3. Outlet diameter: 0.3mm-0.7mm
4. Max. mechanical speed: 1500m/min.
5. Dies: 17 dies
6. Slip ratio: 17.5%, Finished capstan slip ratio: 10%
7. Main motor: AC 3 Phase 22KW, Inverter control
8. Spool motor: AC 3 Phase 2.2KW*2, Inverter control
9. Spool size: Diameter 200mm/Max (Customize)
10. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm
11. Capstan lubrication: Water pipe spray
12. Traversing: 110W synchronous motor,transmission by timing belts.
13. Brake: 20KG-M Electromagnetic brake
14. Air pressure: 4-6kg/cm2
15. Annealing volt: 60V
16. Annealing current: 600A
17. Annealing motor power: 36KVA
18. Power source:380V/50Hz (customize)
19. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
20. Transmission part; The main drive is mainly driven by a toothed belt (inlet), and the annealed part is driven by a flat belt.
21. Structure:Steel plate welding annealing treatment, integrated processing.
22. Bobbin loading and unloading type: Double end thimbles, trolleys are attached.
III. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-17DWT main drawing machine | 1 set |
| 3. Electrical control system | 1 set |
| 4. Steam generator | 1 set |
| 5. Lubrication tank and Pump | Optional |
| 6. Spare parts |
IV. Machine structure
Annealing method is DC Three section annealing, there are three contact capstans, as Pre-Heating, Annealing and Drying. For drawing machine part, there is belts that connection from the Fix-speed capstan to the Annealer machine to achieve the transmission, as keep same speed.
Connect the Up capstan and Down capstan with Positive and Negative power, to make the wire in a short circuit, to achieve the heating.
There is annealing plate to auto track and adjust the speed and annealing voltage.
To achieve fast coolant to make the wire soft(Annealing), the Down capstan is immersed into the coolant water(There is a water tank in the bottom of the Annealer machine), coolant water is 0.5% emulsion. With the Pump to pump the coolant water through all pipes and valves, half sealed annealing door. Adjust the valves to adjust the coolant water in certain height.
To make sure the wire no oxidation, in the annealing protection pipe has steam (Buyer self will prepare Steam generator).
In the drying section, has a blowing device (Require two Tungsten dies, Buyer self prepare), by compressed air (Buyer self prepare Air compressor) to blow the water on the surface of the wire.
Lubrication oil concentration of mix with water 2-3%.
V. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
|
|
1500mpm Customized Wire Drawing Machine For Drawing And Annealing Automatic Double Spooler Images
|
