0.6mm-1.2mm Small Wire Making Machine, Cast Iron Structure Fine Wire Drawing Machine

0.6mm-1.2mm HXE-24DW Fine copper wire drawing machine

I. Quick description

24DW Fine copper wire drawing machine is used to drawing copper wire from 0.6mm-1.2mm to 0.08mm-0.5mm.

II. Components

III. Specifications

1. Inlet wire diameter: 0.6mm-1.2mm

2. Outlet wire diameter: 0.08mm-0.5mm

3. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h; 0.3mm, 37kg/h; 0.4mm, 46kg/h; 0.5mm, 52kg/h.

4. Dies number: 24

5. Slip ratio (Area reduction) : 13%+ 8%

6. Wire drawing mode: horizontal-mode and 4 axes

7. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw.

8. Main motor: 15KW AC 3 phase motor

9. Spooler motor: 3.7KW AC 3 phase motor

10. Motor brand: Wan Nan motor, China classical brand

11. Capstan: Ceramic plasma

12. Max capstan diameter: 242mm

13. Max fix speed capstan: 207mm

14. Machine structure: Cast iron

15. Reverse system: PID synchronous control spool

16. Transmission: Flat belts

17. Pay-off method: Over-head

18. Tension control: Weight balance by swing arm

19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,

20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type

22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake

24. Power source: Customize

25. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight: 2500KG

IV. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

6. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

V. Common trouble solve method

1. After shut down the machine, need at least 30 seconds to restart the machine.

2. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.

Before open the machine, make the balance arm at the lowest position, and in running, the balance arm should be in the horizontal line. No big shake, no up and down frequently.

3. If the wire sticks to the capstan, use Alcohol to clean the capstans.

4. Pay-off shelf doesn`t work well, change the position of the pay-off.

5. Has nick on the wire, check the capstans on the Take-up part.

Check the drawing capstans.

VI. Installation

The machine should be installed in the flat clean, well-ventilated ground, shock-absorbing rubber block on the base of the machine, placed by horizontal correction.

Use the foundation screws to fix the four sides of the machine on the ground to ensure that the machine is in operation, no vibrate.

Electrical control box RST terminal for the external power cord, ground wire terminal must be grounded.

fine copper wire drawing machine

aluminum wire drawing machine

0.6mm-1.2mm Small Wire Making Machine, Cast Iron Structure Fine Wire Drawing Machine Images