HXE-14DT Fine copper wire drawing machine with annealing
I. Quick details
HXE-14DT Fine copper wire drawing machine with annealing is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.25mm-0.6mm.
II. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-14DT main drawing machine | 1 set |
| 3. Electrical control system | 1 set |
| 4. Bobbin unloading device | 1 set |
| 5. Steam generator | Optional |
| 6. Lubrication Tank and Pump | Optional |
| 7. Spare parts | As per List |
| 8. Others | |
III. Main Technical parameters
1. Usage: Fine copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.25mm-0.6mm
4. Max. mechanical speed: 1500m/min
5. Dies: 14 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 15KW, Inverter control
8. Take up motor: AC 3 Phase 5.5 kw, Inverter control
9. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
10. Spool size: Diameter 300mm/Max (Customize)
11. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm
12. Capstan lubrication: Water pipe spray
13. Traversing: 110W synchronous motor,transmission by timing belts.
14. Brake: 20KG-M Electromagnetic brake
15. Air pressure: 4-6kg/cm2
16. Annealing pulley: Diameter 120mm
17. Annealing volt: DC50V
18. Annealing current: DC600A
19. Annealing motor power: 30KVA
20. Power source: (customize)
21. Spool control: PID
22. Tension control: Weight balance
23. Machine dimension(L*W*H): 2600mm*1600mm*1900mm, Machine weight:3200kg
IV. Advantage and after-self service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Working Environment
5-1. Not more than 1000 meters above sea level.
5-2. Temperature －10℃－40℃
5-3. Relative temperature does not exceed 85% (25 ℃)
VI. Lifting the machine, installation, adjustment
6-1. Lifting, there are four lifting rings to lift.
6-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
6-3. Adjustment, clean all parts, check all the part no loose.
Product Tags:
|
|
Customize Power Source Cone Fine Wire Drawing Machine Water Pipe Spray Lubrication Images
|
