HXE-17DWT Fine copper wire drawing machine with annealer and double spooler
I. Application
HXE-17DWT Fine copper wire drawing machine with annealer and double spooler is used to draw and anneal single bare copper wire from 1.8mm to 0.3mm-0.7mm.
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 1.8mm
3. Outlet diameter: 0.3mm-0.7mm
4. Max. mechanical speed: 1500m/min.
5. Dies: 17 dies
6. Slip ratio: 17.5%, Finished capstan slip ratio: 10%
7. Main motor: AC 3 Phase 22KW, Inverter control
8. Spool motor: AC 3 Phase 2.2KW*2, Inverter control
9. Spool size: Diameter 200mm/Max (Customize)
10. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm
11. Capstan lubrication: Water pipe spray
12. Traversing: 110W synchronous motor,transmission by timing belts.
13. Brake: 20KG-M Electromagnetic brake
14. Air pressure: 4-6kg/cm2
15. Annealing volt: 60V
16. Annealing current: 600A
17. Annealing motor power: 36KVA
18. Power source:380V/50Hz (customize)
19. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
20. Transmission part; The main drive is mainly driven by a toothed belt (inlet), and the annealed part is driven by a flat belt.
21. Structure:Steel plate welding annealing treatment, integrated processing.
22. Bobbin loading and unloading type: Double end thimbles, trolleys are attached.
III. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-17DWT main drawing machine | 1 set |
| 3. Electrical control system | 1 set |
| 4. Steam generator | 1 set |
| 5. Lubrication tank and Pump | Optional |
| 6. Spare parts |
IV. HXE-17DWT Main drawing machine
1. Material: A3
2. Structure
2-1. Frame is weld by steel plate, sand blasting and anneal to eliminate the inner stress.
2-2. Further processed by exactitude milling machine.
3. Wire inlet location: Located on the left of machine, 6 bores.
4. Axes: Material:42# steel. Precision: HRC25/27. Eliminate inner stress, improve the rigidity.
5. Capstan: Ceramic coating, 4pcs. Loading&unloading the capstans, fixed tightly by cone model, capstan could be displaced according to the die location, avoid break the precision of axes.
6. Die Seat
6-1. The 1st and 16th dies are founded by milled iron, small, increase operating room.
6-2. Die seat could be displaced according to the location of capstan.
7. Lubricating
7-1. Over the capstan and dies, has floating water pipe, won’t impact the wire pointing.
8. Bobbin size: 200mm(customize)
9. Bobbin speed control:
9-1. By Air pressure, auto revising the spooler tension automatically.
9-2. Regulating the tension according to the different sizes of outlet diameter.
9-3. Each machine will have one weight balance device as back up.
10. Traversing unit:
10-1. 110W synchronous motor, traverse width 220mm (Max)
10-2. The bearing is slippery, high rigidly and fray slowly.
V. Advantage and After-sale service
A: Advantage
(A1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(A2). Body and other key components and parts are produced by our own factory , quality is reliable.
(A3). DC. three-section annealing
(A4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(B1) 1 year for mechanical part.
(B2) 6 month for electrical part.
|
|
17 DWT Copper Wire Drawing Machine With Annealer And Double Spoolers , Customized Machine Images
|
