HXE-13DLA Aluminium rod breakdown machine with Annealing , Double spoolers
I. Quick description
HXE-13DLA Aluminium rod breakdown machine with annealing is used to draw and anneal single bare aluminium wire from 9.5mm to 1.7mm-4.2mm.
II. Parameter
1. Inlet wire diameter 9.5mm
2. Outlet wire diameter 1.7mm-4.2mm
3. Actual drawing & annealing speed 800m/min
4. Number of Dies 13
5. Drum speed ratio 1.25
6. Capstan Iron cast, With Tungsten Carbide surface, 650mm, 4 pieces
7. Machine frame Welded
8. Main motor AC 75KW, Fix speed motor 22KW
9. Spooler motor AC 11KW
10. Inverter Inovance Brand
11. Speed adjust by Inverters
12. Transmission by Gear&Triangle Belts
13. Cantilever type pay-off shelf
14. Free rod type traversing
15. Power source customized
16. Annealing voltage 60V
17. Annealing current 3000A
18. Annealing power 180KVA
19. Annealing type D.C. Three section annealing
20. Annealing speed control by Inverters , auto tracking the drawing speed
III. Component
| 1. Pay-off shelf | 1 set |
| 2. HXE-13DLA Aluminium rod breakdown machine | 1 set |
| 3. HXE-TH350 Annealing machine | 1 set |
| 4. HXE-180 Tension controller | 1 set |
| 5. HXE-WF650 Coiler (Optional, Not concluded in the quotation) | 1 set |
| 6. HXE-SX630 Double spoolers | 1 set |
| 7. Electrical cabinet | 2 set |
| 8. Operation panel | 1 set |
| 9. Spare parts for One year | 1 set |
| 10. Gear Oil System (Pump,Cooler, others) | 1 set |
IV. Operation details
1. Open the power switch of the electrical cabinet.
2. Use the Foot-switch while make the wire through the dies.
3. After make the wire through some dies, should open the lubrication oil to make sure no wire break.
4. Make the wire through the take-up part well arranged, then close the door.
5. According to the user`s require to set the Length-counter, adjust the balance arm.
6. If wire breaks, will stop automatically, and the Fault Indicator light will open.
After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.
7. Press Emergency Stop button(Red button) to shut down the machine immediately.
After solve, press the button again to run the machine.
8. After set the Length-counter, the machine will stop automatically when reach the length set.
After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.
9. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.
V. Advantage and after-sale service
After-sale service
Warranty: after shipping, machine part one year, electrical parts six months
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
Product Tags:
|
|
13DLA Aluminium Wire Drawing Machine , Al Wire Drawing Equipment With Continuous Annealing Images
|
