HXE-22DW Fine aluminium wire drawing machine
I. Quick details
22DW Fine aluminium wire drawing machine is used to drawing aluminium wire from 1.2mm-2.5mm to 0.2mm-0.8mm.
II. Components
| Name | Quantity |
| 1. Pay-off shelf | 1 set |
| 2. HXE-22DW Fine aluminium wire drawing machine | 1 set |
| 3. Bobbin Unloading device | 1 set |
| 4. Spare parts | As per List |
| 5. Operation manual | |
III. Specifications
1. Inlet wire diameter: 1.2mm-2.5mm
2. Outlet wire diameter: 0.2mm-0.8mm
3. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h; 0.3mm, 37kg/h; 0.4mm, 46kg/h; 0.5mm, 52kg/h.
4. Dies number: 22
5. Slip ratio (Area reduction) : 13%+ 8%
6. Wire drawing mode: horizontal-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor: 3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan: Ceramic plasma
12. Max capstan diameter: 242mm
13. Max fix speed capstan: 207mm
14. Machine structure: Cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: Flat belts
17. Pay-off method: Over-head
18. Tension control: Weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type
22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake
24. Power source: Customize
25. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight: 2500KG
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
V. Preparation
(1) Check if the oil is correct, if the oil inside the oil drum accord request, if each part of the machine is clean, pay special attention to the place around the switch, make sure no oil or dirt.
(2) Confirm the three phase power supply, voltage 380V, 50HZ.
(3) If the power cable has cut.
(4) if the ground wire is connected correctly
(5) If the oil type for wire drawing is correct, any change of the oil character, any dirt in the oil.
(6) If the wire size in the range, if the material is the correct model.
(7) Check the correct specification of the iron shaft, no sharp end, pay special attention to see any damage on the contact surface between inner hole of the iron shaft and the lock blot, balance correction should less than G6.3.
(8) If the bobbin is tightened by wrench.
(9) If the trolley is kept away from the bobbin.
(10) If the copper wire feeding device is working smoothly.
(11) If the machine surrounding area is clean
(12) If any leakage of oil or water from the machine.
(13) Check if the dies arrangement and distribute correct, and if the dies direction is correct. (calculate with section reduce rate)
(14) If the a guide pulley is adjusted within the width of the wind shaft.
(15) If the fan inside the electric control box is working normally
(16) If the base ground is strong enough.
(17) If any dirt in the spraying system.
Product Tags:
|
|
Cast Iron Structure Aluminium Wire Drawing Machine , Safe Fine Wire Drawing Machine Images
|
