24 DW Horizontal Type Model Fine Wire Drawing Equipment AC 3 Phase Motor

HXE-24DW Fine copper wire drawing machine

24DW Fine copper wire drawing machine is used to drawing copper wire from 0.6mm-1.2mm to 0.08mm-0.5mm.

II. Specifications

1. Inlet wire diameter: 0.6mm-1.2mm. Outlet wire diameter: 0.08mm-0.5mm. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h; 0.3mm, 37kg/h; 0.4mm, 46kg/h; 0.5mm, 52kg/h. Dies number: 24. Slip ratio (Area reduction) : 13%+ 8%.

2. Wire drawing mode: horizontal-mode and 4 axes. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw. Main motor: 15KW AC 3 phase motor. Spooler motor: 3.7KW AC 3 phase motor.

3. Motor brand: Wan Nan motor, China classical brand. Capstan: Ceramic plasma. Max capstan diameter: 242mm. Max fix speed capstan: 207mm. Machine structure: Cast iron. Reverse system: PID synchronous control spool.

4. Transmission: Flat belts. Pay-off method: Over-head. Tension control: Weight balance by swing arm

Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min, Bobbin size: 300mm, material steel, 17kg.
Take up: Shaft type.

5. Bobbin capacity: 50-60kg/max. Brake: Magnetic brake. Power source: Customize. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight: 2500KG

III. Advantage and after-sale service

A: Advantage

(1) HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2) Body and other key components and parts are produced by our own factory , quality is reliable.

(3) Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

A. Due to wrong operation while shipping.

B. Due to Buyer`s wrong preparation that may cause damage to the machine.

C. Due to Buyer`s wrong operation that may cause damage to the machine.

D. Not in the consuming part list.

E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

IV. Components

V. Installation, Lubrication, Through the dies

1. Installation

The machine should be installed in the flat clean, well-ventilated ground, shock-absorbing rubber block on the base of the machine, placed by horizontal correction.

Use the foundation screws to fix the four sides of the machine on the ground to ensure that the machine is in operation, no vibrate.

Electrical control box RST terminal for the external power cord, ground wire terminal must be grounded.

2. Lubrication

2-1. Ensure that the lubrication oil temperature control in the range of 40 -50 ℃ or lower.

2-2. Use special Silver lubrication oil to protect the wire.

3. Through the dies

3-1. Use pliers to break the wire to get a smaller section.

3-2. Use pliers to make the wire through the dies, then pull the wire out. Pay attention to the dies` front and back.

3-3. If wire breaks can use Cold welding machine to fix.

fine copper wire drawing machine

aluminum wire drawing machine

24 DW Horizontal Type Model Fine Wire Drawing Equipment AC 3 Phase Motor Images