HXE-17DST Intermediate copper wire drawing machine with annealer
I. Quick details
HXE-17DST Intermediate copper wire drawing machine with annealer is used to draw and anneal single bare copper wire from 2.6mm-3.5mm to 0.4mm-1.6mm.
II. Compositions of equipments
| Name | Quantity |
| 1. Pay-off(Wire Tangle Auto Stop) | 1 set |
| 2. HXE-17DS Drawing machine | 1 set |
| 3. HXE-TH250 Annealing machine | 1 set |
| 4. HXE-180 Tension controller | 1 set |
| 5. HXE-SX500 Single or Double spoolers | 1 set |
| 6. Electric cabinet | 2 set |
| 7. Operation panel | 1 set |
| 8. Steam generator | 1 set |
| 9. Gear Oil Lubrication System | 1 set |
| 10. Spare parts | 1 set |
III.Main technical parameters
| Machine type | HXE-17DT | HXE-17DST | HXE-17HST |
| Control system | Traditional analog type/digital control with production record |
| Outlet diameter | 0.4-1.2mm | 0.4-1.6mm | 0.4-1.8mm |
| Inlet diameter | 2.6-3.0mm | 2.6-3.5mm | 2.6-3.5mm |
| Max line speed | 1200 | 2000 | 1800 |
| Dies No | 17 | 17 | 17 |
| Slip ratio | 18%+12.5% | 20%+15% | 19.5%+10% |
| Frame | Iron cast | Welded by steel plate |
| Capstan | Tungsten |
| Max capstan diameter | 260mm | 250mm | 280mm |
| Fix speed capstan diameter | 260mm | 250mm | 280mm |
| Spooler bobbin size | 400-630mm |
| Bobbin loading&unloading type | Double end thimble |
| Max.loading capacity | 500KG/MAX |
| Transmission type | By chain | By precision helical gears |
| Traversing unit | 90W belt type redule motor |
| Brake | Magnetic brake/Disc brake |
| Revise system | PID Synchronous control spooler |
| Detecting device | Weight balance by swing arm |
| Tension control | By air pressure adjust |
| Main motor | 37kw | 55kw | 45kw |
| Spooler motor | 11kw | 11kw | 11kw |
| Annealing method | DC.Three-section annealing |
| Max annealing current | DC1200A | DC2000A | DC2000A |
| Max annealing voltage | DC50V | DC50V | DC50V |
| Annealing power | 60KVA | 100KVA | 100KVA |
| Steam quantity | 12kg/h | 12kg/h | 18kg/h |
| Cooling water capacity | 300L/min | 400L/min | 500L/min |
| Capacity of compressed air | 0.4~0.6Mpa,30L/min | 0.4~0.6Mpa,50L/min | 0.4~0.6Mpa,50L/min |
| Power source | 380V50/60HZ |
| Machine dimension | 13300*3500*3400(mm) |
| Machine weight | 6500KG | 7500KG | 6500KG |
IV. Operating procedures
4-1. Open power switch
4-2. According to the wire diameter, choose the dies (Check the die list).
4-3. Use pliers to break the wire to get a smaller section.
4-4. Use pliers to make the wire through the dies, then pull the wire out (Use foot switch to make the machine running in a low speed to make the wire move).
4-5. Wire direction, please check the Drawing for Wire path.
4-6. After make the wire through all the parts, close the annealing door and the spooling door, make the tension swing arm in the lowest position. and in running, the balance arm should be in the horizontal line. No big shake, no up and down frequently.
4-7. Open the Annealing switch, open the Pump, open and adjust the Drawing lubrication oil, Cooling water, Steam, Compressed air.
4-8. Set the length meters, then press the Start button to start the machine.
V. Advantage and after-self service
A: Advantage
(A1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(A2). Body and other key components and parts are produced by our own factory , quality is reliable.
(A3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(B1) 1 year for mechanical part.
(B2) 6 month for electrical part.
Product Tags:
|
|
2000mpm Copper Wire Drawing Machine , 17DST Medium Wire Drawing Machine With Annealer Images
|
